Reheat PET stretch blow moulding machine manual
1700-2300 bottles/hour, max: 0.6L, 2 Cavity
ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L, 2.0L, 5L. It can blow various bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: It has saved the cost to the maximum extent; It has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Reheat PET stretch blow moulding machine manual,equipment information.
|CONTAINER||Number of cavity||1||2||3||1||2|
|Output||1100-1400 pcs/hr||1700-2300 pcs/hr||3000-3300 pcs/hr||1000-1300 pcs/hr||1700-2100 pcs/hr|
|Max. container volume||0.6L||0.6L||0.6L||1.5L||1.5L|
|Max. neck diameter||38mm||38mm||38mm||38mm||38mm|
|Max. container diameter||60mm||60mm||60mm||105mm||105mm|
|Max. container height||260mm||260mm||260mm||350mm||350mm|
|ELECTRICAL SYSTEM||Number of lamp||14pcs||28pcs||32pcs||28 pcs||28pcs|
|Max. heating power||9kw||22kw||32kw||22kw||42kw|
|Actual power consumption||9kw||14kw||20kw||16kw||28kw|
|AIR SYSTEM||Operatating pressure||7kg/cm²||7kg/cm²||7kg/cm²||7kg/cm²||7kg/cm²|
|Low pressure consuming||800Ltr/min||1000 Ltr/min||1200 Ltr/min||900 Ltr/min||1200 Ltr/min|
|Blowing pressure||≤ 30kg/cm²||≤ 30kg/cm²||≤ 30kg/cm²||≤ 30kg/cm²||≤ 30kg/cm²|
|High pressure consuming||1200-1600Ltr/min||1500-2000Ltr/min||2000-2500Ltr/min||1200-1600Ltr/min||2000-2500Ltr/min|
|CHILLER WATER||Operating pressure||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²|
|Temperatuer||10° C||10° C||10° C||10° C||10° C|
|MACHINE||Machine dimension||2.5× 1.4× 1.7(m)||2.9× 1.55× 1.8(m)||3.4× 1.4× 1.8(m)||2.9× 1.7× 1.85(m)||3.1× 1.45× 1.85(m)|
Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.