1.25l plastic bottles stretch blow mold machine
PET blow molding machine with preform manual loading, Speed: 2600-3000 bottles/hour
ZQ-A1500-3, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L, 2.0L, 5L. It can blow various bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: It has saved the cost to the maximum extent; It has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
1.25l plastic bottles stretch blow mold machine,Information.
|CONTAINER||Number of cavity||1||2||3||1||2|
|Output||1000-1300 pcs/hr||1700-2100 pcs/hr||2800-3100 pcs/hr||500-700 pcs/hr||1200-1300 pcs/hr|
|ELECTRICAL SYSTEM||Number of lamp||28 pcs||28pcs||40pcs||28pcs||48pcs|
|Actual power consumption||16kw||28kw||40kw||30kw||40kw|
|AIR SYSTEM||Operatating pressure||7kg/cm²||7kg/cm²||7kg/cm²||7kg/cm²||7kg/cm²|
|Low pressure consuming||900 Ltr/min||1200 Ltr/min||1600 Ltr/min||1200 Ltr/min||1600 Ltr/min|
|High pressure consuming||1200-1600Ltr/min||2000-2500Ltr/min||2800-3000Ltr/min||2000-2500Ltr/min||3000-3500Ltr/min|
|CHILLER WATER||Operating pressure||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²|
|Machine weight||1.6T||1.8T||2.3T|| 2.0T|| 3.0T|