Plastic Injection Mould Pet Preform
Our company can make 12-48 CAV. PET Preform mould with hot runner system. Using point to point temperature control, it is easier to adjust every cavity of the temperature of the mould. The quality of the preform is the same like Canada quality. The design of the preform also different that make your capacity increase.
Plastic Injection Mould Pet Preform - HOT RUNNER SYSTEM
A). Hot runner employs PID controlling system which features automatic compensation and automatic protection, and contributes to the prolongation of lifetime of electric heater;
B). The precision of temperature controlling falling within 1 degree which ensures to avoid plastic in the hot runner being burnt, resulting in a yield of up to 99% and more;
C). Ultra nozzles are designed to be maintenance-friendly. Nozzle tip inserts, heaters, tip insulator, and thermocouples are easily accessible an can be replaced while the hot runner is mounted in the machine, which minimizes down-time and reduces maintenance cost.
Core and cavity in mould are top materials. All the parts are processed on CNC machine tool with high precision, especially the plate, the tolerance is less than 0.05mm. And all parts are treated by heat treatment strictly. To ensure their intension and life time good enough. After the treatment, the intensive neck ring and core hardness can be HRC48~52, the hardness of cavity can be HRC44-48.
Plastic Injection Mould Pet Preform,Main feature:
1. Mold cavity from 48.
2. Electric control system with simulating stretch testing improve yield rate.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentricity.
4. The material of mould die core and die cavity are made of Sweden special mould steel.
5. International standard screw neck, imported nitrided steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 2 million guarantee.
PET Preform Injection Molding Machine,Information.
|
ZQ88-M6 |
ZQ128-M6 |
ZQ168-M6 |
|
275/88 |
416/128 |
619/168 |
| International size rating |
| INJECTION SYSTEM |
A |
B |
C |
A |
B |
C |
A |
B |
C |
| Shot volume cm 3 |
129 |
163 |
201 |
215 |
263 |
316 |
291 |
349 |
463 |
| Shot weight g |
121 |
153 |
189 |
196 |
239 |
287 |
273 |
328 |
435 |
| (PS) oz |
4.2 |
5.4 |
6.6 |
6.9 |
8.4 |
10.1 |
9.6 |
11.5 |
15.2 |
| Screw diameter mm |
32 |
36 |
40 |
38 |
42 |
46 |
42 |
46 |
53 |
| Injection pressure Mpa |
214 |
169 |
137 |
193 |
158 |
132 |
190 |
169 |
120 |
| Screw L: Dratio ----- |
23:1 |
20:1 |
18:1 |
22:1 |
20:1 |
18:1 |
23:1 |
20:1 |
18:1 |
| Screw stroke mm |
160 |
190 |
200 |
| Screw speed (stepless) r/min |
0-215 |
0-220 |
0-234 |
| CLAMPING SYSTEM |
ZQ88-M6 |
ZQ128-M6 |
ZQ168-M6 |
| Clamping force KN |
880 |
1280 |
1680 |
| Opening stroke mm |
320 |
380 |
430 |
| Platen size mm×mm |
550×550 |
620×620 |
700×700 |
| Space between tie bars mm×mm |
360×360 |
410×410 |
460×460 |
| Max.daylight mm |
680 |
810 |
930 |
| Mold thickness (Min-Max) mm |
150-360 |
150-430 |
180-500 |
| Hydraulic ejection stroke mm |
100 |
125 |
140 |
| Hydraulic ejection force KN |
31 |
42 |
50 |
| POWER UNIT |
ZQ88-M6 |
ZQ128-M6 |
ZQ168-M6 |
| Hydraulic system pressure Mpa |
16 |
17.5 |
17.5 |
| Pump motor KW |
9.5 |
11 |
15 |
| Heating capticy KW |
6.5 |
8.9 |
9.8 |
| Number of temp control zones----- |
3+nozzle |
3+nozzle |
3+nozzle |
Note: The specifications are subject to change without notice for the further improvement.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}