Preform mould maker PET 5 gallon bottle preform
Our company can make PET Preform mould with hot runner system. Using point to point temperature control, it is easier to adjust every cavity of the temperature of the mould. The quality of the preform is the same like Canada quality. The design of the preform also different that make your capacity increase.
Plastic injection mould pet preform - HOT RUNNER SYSTEM
A). Hot runner employs PID controlling system which features automatic compensation and automatic protection, and contributes to the prolongation of lifetime of electric heater;
B). The precision of temperature controlling falling within 1 degree which ensures to avoid plastic in the hot runner being burnt, resulting in a yield of up to 99% and more;
C). Ultra nozzles are designed to be maintenance-friendly. Nozzle tip inserts, heaters, tip insulator, and thermocouples are easily accessible an can be replaced while the hot runner is mounted in the machine, which minimizes down-time and reduces maintenance cost.
Core and cavity in mould are top materials. All the parts are processed on CNC machine tool with high precision, especially the plate, the tolerance is less than 0.05mm. And all parts are treated by heat treatment strictly. To ensure their intension and life time good enough. After the treatment, the intensive neck ring and core hardness can be HRC48~52, the hardness of cavity can be HRC44-48.
Preform mould maker PET 5 gallon bottle preform for ZQ22-V Machine.
ZQ22-V stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
ZQ22-V consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
Features
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to 200mm.
3. Using Infrared reheat units to achieve uniform heating throughout the wall of preform
4. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle
8. Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.
9. Equipped with special designed air storage units
10. Simple installation & startup adjustment
| TYPE |
ITEM |
UNIT |
TECH. DATA |
| ZQ22-V |
Main
Machine |
Max.Volume of Product |
Gallon |
3-6 |
| Output |
pcs/h |
50-180 |
| Neck Size of Product |
mm |
<=160 |
| Useful Area of Mould |
mm |
420*660 |
| Mould Thickness |
mm |
350-420 |
| Mould Stroke |
mm |
<=350 |
| Clamping Force |
KN |
80 |
| Stretching Stroke |
mm |
530 |
| Working Pressure |
Mpa |
<=1.0 |
| Blowing Air Pressure |
Mpa |
<=4.0 |
| Power of Main Blower |
KW |
2 |
| Weight of Main Blower |
Kg |
2500 |
Measurement of Main
Blower |
mm |
2800*720*2160 |
| Preheater |
Power of Preheater |
KW |
16 |
| Weight of Preheater |
Kg |
800 |
Measurement of
Preheater |
mm |
2200*750*1880 |
Note: The specifications are subject to change without notice for the further improvement.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}